Showing posts with label terrain. Show all posts
Showing posts with label terrain. Show all posts

Tuesday, 31 July 2018

Team Yankee US forces so far

The below photos show my US forces so far for my 1/72 Team Yankee / One Hour Wargames home brew rules.

I can now call on 1 M60A3, 4 M1 Abrams, 2 Sheridan light tanks and 2 units of Mechanised Infantry mounted in a pair of M113 APCs to defend Western Europe from the Red tide of Communism. God bless America (and their main battle tanks!)

I got a job lot of Abrams in a lucky ebay purchase so I converted one to serve as scatter terrain. After attacking the hull with some pliers and a liberal application of black / brown paint over the damage, I had a wrecked tank to put on the wargaming table.







Sunday, 25 February 2018

Solo After Action Report - OHW Flank Attack (2) - Germans vs BEF

Here are some photos of a solo battle I played through this afternoon. I chose the One Hour Wargames Scenario 7: Flank Attack (2) to see how the WW2 rules play out and see if they needed any modifications.

The setting is Northern France, summer 1940. The Red forces holding the objective, the main hill, would be the plucky lads of the BEF. The attacking Blue forces in the scenario were my early war Germans. The Wermacht would attack from front and flank in an attempt to capture the hill and strike a blow to the British rearguard. The Brits had to hold the hill at all costs.

The German forces consisted of three infantry units, a Pak 36 anti-tank gun, and two tanks, a Panzer IV and a Czech 38t.

The British had four infantry units, a 2-Pounder anti-tank gun and a 25lb-er gun howitzer.

To summarise the action, the main German thrust was on the British left flank, whilst the German anti tank and one infantry unit demonstrated against the BEF centre. The BEF lads soon noticed the typical shabby Nazi trick and redeployed to counter it. The German infantry attack stuttered a little at first, leaving their tanks to drive deep behind the hill. However, despite the Panzers' speed and firepower they could not consolidate their gains without their accompanying infantry. When the German foot soldiers did advance, the British artillery piece was ready for them and the 25lb shells carved bloody holes in their ranks. The British 2-pounder anti-tank fire from the hill had mixed success, but with assistance from heroic neighbouring infantry, the German panzers were defeated.

Towards the end of the battle, with only a anti-tank gun for support the German infantry pushed hard up the hill, but with poor dice rolls and artillery hammering them, they were ultimately defeated. In the One Hour Wargames rules, anti-tank guns are rather redundant if the enemy has no armour on the table, so the Germans had one sixth of their force at an immediate disadvantage. In contrast, the British artillery piece did sterling work and survived the battle with only one point of health remaining. Unsurprisingly my Zvezda British medic team had lots to do! The last remaining British infantry unit, comparatively untouched on 9 points of health out of 15, had managed to stay out of trouble during the early stages and thereby formed a good "meatshield" protecting the howitzer.

Overall a tense battle, again showing that anything outside of cover and within line of sight doesn't last very long on a Second World War battlefield! It's also a good idea to attack with all of your units simultaneously, and if you lack artillery support, throw your men forward as soon as possible!

The only thing I would improve for next time is to include a bit more battlefield clutter and light cover for this wargaming period, as artillery vs infantry engagements are absolutely brutal!

The last couple of photos show the British commander raising his hand in appreciation to his men, and the knocked out Panzers behind the hill.

Sunday, 12 November 2017

More trees for the wood

Back in July I posted about making trees for my collection of wargaming terrain. Here's a photo of my trees to date, displayed on a 12inch by 12inch mat upon which they'll represent a forest. I've got four more trees to make from my original bag, so with those finished I should have enough to make this 'forest' look a little more populated. The trees and bases detach from one another, making them easy to stow away when not in use. The bases are also free standing so that they can be moved about when a wargaming unit travels through the forest.

Wednesday, 26 July 2017

Separating the wood from the trees...

These are my initial attempts at trees for my wargaming terrain. These are bare and autumnal, on muddy bases painted with GW Stirland Mud. These are done in a similar way to a few tree bases I did for my desert / South Africa wargaming forces a couple of years ago.

I used a big pack of plastic trees for railways from my local model shop. They consisted of around 4 different tree designs with bendable branches, which all slot into tree trunk bases. After a bit of bending and snipping, I used the bases blu tacked to my usual milk caps to hold my trees still for painting. The trees themselves had coats of generic black acrylic, GW Rhinox Hide, a dry brush of GW Steel Legion Drab, followed by inking with Agrax Earthshade.

The bases I used came from discarded Zvezda Samurai gaming bases. I used blu tac and liberal paint coats to seal in the tree bases to them. After Stirland Mud coats I simply pegged in the loose trees and voila, a few trees to start off some woodland. Huzzah!

Sunday, 2 July 2017

One Hour Wargames - Take the High Ground

Today my girlfriend kindly offered to play a one hour wargame scenario with me using my muddy fields wargaming mat and my American Civil War armies.

We played "Take The High Ground" on a map that consisted of a marsh, road and small hill. With the limited amount of terrain I currently have this scenario was the most appropriate to use.

We each rolled for army composition and for who would be Red / Blue forces. I was the defending Red Army, fighting with Union forces, whereas my other half fielded a Blue Army of Confederates. I had three infantry units, two elite infantry units (called Zouaves in the Wargames book) and one artillery piece. Facing off against them were four Confederate infantry units, one elite infantry unit and a unit of dashing Rebel cavalry. After my test game (Marye's Heights) I allowed cavalry to charge as per Napoleonic rules, dishing out D6 damage but then retreating 6" once the sabres had been rattled!

The cavalry charging ability was put to good practice, taking a toll on the elite Union infantry guarding the hill. My artillery was also present  on the hill, enabling it to start thinning out advancing Rebels. Having the cannon at the front line also stopped Union reinforcements from blocking its line of sight. The elite units in the game were high priority targets, getting some good volleys off but attracting plenty of attention in return. Union firepower started off very well but Lady Luck eventually favoured the Confederates in the crucial final stages of the game.

To summarise the battle, isolated Union forces on the hill were crushed by a mixture of cavalry charges and elite musketry. Meanwhile Rebel infantry held Union reinforcements up on the main road long enough for their comrades to secure ownership of the hill. By taking the high ground, the Confederate forces just had to dig in and hold out against the Yankee counter attack. At one point both sides had exactly the same strength, but the dice rolls eventually favoured Johnny Reb and my brave boys in blue were seen off. My girlfriend quite enjoyed it, especially using her gallant cavalry to savage my elites. 

Overall a very close game, showing that the dice don't always go your way despite seemingly good visual odds on the battlefield. Severely wounded units can still cause a lot of pain (especially those elites with a +2 damage bonus!). I learned that artillery in the open and close to the enemy can only hold out for so long, and that at the end of the day, it's the poor bloody infantry that secure victory!

Sunday, 25 June 2017

One Hour Wargames - Maryes Heights

Last weekend I played out a solo game of the American Civil War rules in One Hour Wargames using my muddy fields wargaming mat.

I wanted to see how the different units performed on the battlefield. The battle map was loosely based on the Battle of Marye's Heights, December 1862. General Burnside hurled the Army of the Potomac against Confederate defensive works around the town of Fredericksburg. After sustained and costly frontal attacks the Union offensive was repulsed and another period of relative stalemate followed in the Eastern theatre. It would not be disturbed until the Battle of Chancellorsville the following year. 

For this scenario I used a hill, trench and my hasty barricades to form the Confederate fortifications, and selected an Rebel army of three infantry and two artillery units to fend off the Yankee attack.

I then rolled a dice to decide the composition of the Union forces. The 1 rolled resulted in three infantry, two artillery and one cavalry unit to throw at the Rebel strongpoint.

To summarise the battle, the Union attackers divided to flank the Rebel position, but despite supporting artillery fire chipping away at the Confederates, the defences held out. Union volleys and cannon fire could not make a decent impression on their opponents. 

Lessons learned? Units in hard cover (behind barricades, halving incoming damage) are bloody tough, and one infantry unit in cover can take on two enemy infantry units quite effectively, especially as the rules prohibit close combat. My main mistake was to field 5 units with hard cover against just 6 attacking units who only had a small hill to screen their advance. I also learned that artillery is no battle winner - many round of shooting on both sides did absolutely nothing! So much for accurate rifled cannon!

The one main issue I have with the ACW rules in One Hour Wargames regards cavalry's inability to draw swords and put them to good use. For future games I intend to allow close combat in line with Napoleonic cavalry, as their mobility counts for little when they can't shoot a barn door at 10 paces! Infantry units in comparison do far more of the fighting - and dying - making them the most decisive participants in the field.

Saturday, 17 June 2017

Martian Assault Tripod 1

This is my first of the Martian Assault Tripods from All Quiet on the Martian Front manufactured by Alien Dungeon. This white tripod is a Martian embodiment of a battlefield leader. It's main weapon is a heat ray located in the "crest" of the tripod head. It also has a pair of tentacles for interaction with objects and people on the ground, and a pair of vicious claw like hands for close combat.

The scenic base was made from cheap blu tac "sealed" and painted with GW paints. The trees were spare plastic ones and the sign for Grover's Mill farm, a nod to Orson Welles's War of the Worlds, was a metal trench accessory from Early War Models.

As seen in the photo, my tripods will be able to be dismantled into several pieces for storage purposes. As I currently have very limited space in Bristol I can't have these bad boys on display, so I feel another Really Useful Box will be needed!

I have already started my second tripod, armed differently, with another scenic base. This time it's an abandoned mortar pit, and the weapon is a Black Smoke launcher, a weapon as feared as the Heat Ray...

Sunday, 28 May 2017

WIP Martian Assault Tripod 1

The following are the most recent photos of my first Martian Assault Tripod model from the All Quiet on the Martian Front model range. The legs and body have been painted with GW Leadbelcher followed by a generous coat of GW Nuln Oil ink. The underside of the 'head', arms and tentacles have undergone the same coats. The main head cover has been painted with Ushabti Bone - I'm paying homage to the various colours of Dr Who Daleks. As this is my first one and it has two grabbing claws only, it will represent a command tripod, leading by example. In comparison with the original game mechanics I have not included an official Heat Ray, and I won't be doing so on any of the other tripods. I always imagined the heat ray weapon being head mounted, either in the central eye, or on this model, possibly emanating out of the head's distinctive 'crest'. The heat rays provided on the sprues are the only thing I don't like about this range of models - in my opinion it looks more like an oversized remote control than a terrifying energy weapon. I will also be using the green gas bombs and storage tube as something totally different - again it is a little too cartoony for my creative vision. I'll show how I intend to use the green gas accessorised in another article, let's just say it'll be "shocking" pun intended.

The main eye of the tripods is coming along nicely, I'm going for a Sauron-esque reptilian red eye using a combination of GW paints.

I've also decided to customise the base for this model. I've done a couple of scenic bases for my WW1 models in the past, so I'm going to use the same method - white tack as a modelling putty along with various accessories from my bits box. An Early War Miniatures trench accessory has now been painted up as a signpost for the base. Grovers Mill is the name of the farm where the Martians first land in Orson Welles' renowned radio adaptation of the HG Wells novel. So a mixture of homages to sci-fi will be included in the final product.

Sunday, 30 April 2017

Hasty Barricades from S and S models

I've just finished 4 pieces of resin Hasty Barricades from S and S models. They will make a great addition to my wargaming terrain. I'm hoping to combine them with Armourfast houses to represent a 'town' in One Hour Wargaming rules. This would form a potential objective for the armies fighting, and these barricade pieces are the perfect length for my Renedra wargaming bases. I've used a variety of GW paints and inks, with a bit of drybrushing to raise little details. In my experience resin models are a massive faff usually and halfway through painting these up I felt they would look awful. But GW inks like Agrax Earthshade and Athonian Camoushade make the sacks and barrels look the business.

WIP Armourfast Farmhouse 1

This is my first attempt at an Armourfast Farmhouse. To use it for a variety of periods (1700s onwards) I wanted to give it some slight battle damage but still retain the main structure so that wargaming units can hide behind it. The next stage will be strengthening the joins with Liquid Green Stuff and using the same substance to break up the surface of the cream coloured plastic.